favorite
favorite
verbergen
einbl.
flag

Gepostet

druck

Palmer FAT 50 Guitar Amp - €399

12345

Bedingung: ausgezeichnet
Größe / Maße: 58 x 50 x 27
Marke/Hersteller: Palmer
Modell/Nummer: FAT 50

Get this AMP incl. the FAT 4 Pedal and the cover. I purchased in Summer 2018 played it twice and I am only selling itit is too loud for my stuff. Clean, crunch and lead sounds great, no need for a booster pedal when playing lead/solo. This beast rocks.

- Tubecombo amp: 50 W
- Speaker: 1 x 12″ Eminence Governor „Red Coat“
- Channels: 2
- Inputs: 1
- Reverb: spring reverb
- FX loop adjustable
- Dimensions: 58 x 50 x 27 cm
- Foot switch: Palmer FAT 4 (4 pedals)
- incl. 2 cables for FAT 4 pedal (4 m and 10 m)
- EQ section
- orginal cover

Come by and check, pick-up against cash preferred, otherwise DHL shipping is 17.50 €.

Read what Ry Cooder thinks about the FAT 50:

The Palmer FAT50 guitar amplifier delivers what the specifications suggest. And more! This state of the technique work of German engineering exceeds all expectations.

An amp that follows me through my musical styles, from Country, Country Rock, Southern Rock, to Blues and Blues Rock.
The standard footswitch panel really emphasizes it's versatility on stage, with:

- Gain (Low Gain / High Gain) High Gain being Crunch mode on the Clean channel & Heavy Lead mode on the Drive channel.
- Channel select (Clean / Drive)
- Reverb (On / Off)
- Volumeboost (On / Off) This functions as a Boost switch. “On” following the Master Volume of the amp, “Off” following a reduced Master Volume which can be set on the back of the amp. A nifty feature, that works great!

The Clean channel has plenty volume, loads of headroom and, if needed, a smooth and subtle crunge for rhythm guitar (real country rock). An excellent configuration which supplies the whole spectrum from "country clean" to “country rock” styles.

I tend to use an ever changing and large variety of pedals. Luckily the FAT50 is extremely pedal friendly (it even has a tube driven effects-loop). The dry / wet knob accommodates dialling in the amount of effect (from parallel to series). 100% Wet being all effect.

Since the FAT50 is a very “straight and tight" sounding amp with good articulation and tone separation, it'll make your effects standout well, especially on it's Clean channel.

I have used this amp for acoustic guitars on several occasions and it sounded surprisingly good. The equalisation on this amp, combined with my guitars controls, provides me a really good acoustic sound. This goes for my dual source (piezo- / magnetic-pickup) resonator guitars as well. The crunch setting even gave it a nice edge.

So, the Clean is awesome.
Yet, the amp can deliver a nasty Blues overdrive as well. From the the most subtle Crunch available on the Clean Channel, it flows over into the crunch tones of the Drive channel, which reaches into a really fat Overdrive.

From Clean to a medium Overdrive are the two opposites I use. The amp offers much more sounds though. The Drive channel can be taken into the Metal zone by using the High-gain setting.

The FAT50 has a subtleness that allows smooth changes in atmosphere and character within my sounds. Due to it's overwhelming amount of headroom, it's possibilities are limitless. A true blessing.

Physically, it's a robust. The known Palmer sturdiness, made with German precision. I have little knowledge about the electronics, tubes and such, but I'm 100% convident that only the best quality parts are used by Palmer.
As I opened the back, it showed the effort that has been put into this amp to get quality, even in the smallest details. An extremely neat amp, no worries for rattles or hum here. The Reverbtank neatly wrapped and all panels and grills dampened and securely fitted. The Footswitch (with long solid leads) comes standard with the amp, but the cover is optional. The weight reflects the sturdiness of this amp without it breaking my back.

It'll withstand the rigours of the road easily. Operating this amp, you can tell Palmer made the right choices. Speaker, knobs, cabinet, gril, tubes, it all works as one like clockwork. The ease of tweaking the amp to your own preferences is a real treat. No rocketscience!
“Dialling in” is the magic word.
I discovered it has this "from left to right logic" to it. Going from Clean to Metal.

It'll accompany me to whatever gig I play, as it suites all my needs and styles. It might even be taken on Metal gigs by friends. No sweat, for this amp.

Read what Ry Cooder says:

Mind you: this amp is loud! Really loud! This is not a guitar amp to use at home, but it's all you need for any gig. It's my believe that most guitarists can play any gig with 50 watt amps, especially if they are versatile and have much headroom. So this FAT50 is the thing.

GERMAN DESCRIPTION:

- inkl. FAT 50 Combo Amp, 50 Watt
- FAT Pedal inkl. 4 m Kabel
- Hülle von Palmer

2-Kanal-Röhrencombo mit klassischer Röhrenverzerrung und sehr druckvollem Sound.

Seit fast 30 Jahren kennt man die deutsche Firma Palmer als Produzenten hochwertiger Verstärker und anderer tontechnischer Geräte. Der Combo, den wir heute vorstellen, zählt zur Serie „FAT“, deren Ursprünge in gewisser Weise schon bis in die 80er Jahre zurückreichen – eine Zeit, in der Röhren-Amps sehr populär wurden. Dementsprechend präsentiert sich der FAT50 mit klassischem Rock-Sound und typischer Röhrenverzerrung und eignet sich damit perfekt für moderate Crunch-Sounds, aber auch für druckvolle Overdrive- und High-Gain-Sounds.

Konstruktion

Der Palmer FAT50 ist ein 2-Kanal-Röhrencombo mit 50 Watt Leistung, einem Eingang und Eminence Governor „Red Coat“ 12″-Lautsprecher. Frontseitig umfasst die Ausstattung des FAT50 einen Master-Volume-Regler zur Voreinstellung des Ausgangspegels, einen Reverb-Regler, 3 Schalter (Clean-/Drive-Kanal, Normal/Brillant, High/Low Gain), je einen Lautstärkeregler für den Clean- und für den Drive-Kanal und die Klangregelung mit Drive, Bass, Mid, Treble und Drive Presence. Auf der Rückseite finden sich verschiedene Anschlüsse, ausgeführt als Klinkenbuchsen: Eingänge für den Fußschalter mit zusätzlicher Lautstärkeregelung, zwei weitere Anschlüsse für den Effektweg (Send/Return, mit Lautstärkeregler) und vier für die Einbindung externer Lautsprecher (mit 8 oder 16 Ohm). Der FAT50 ist ein klassischer Combo in Standardgröße. Ein großes Plus des FAT50 ist übrigens, dass der Fußschalter (FAT 4, mit Metallgehäuse) bereits im Lieferumfang enthalten ist. Er verfügt über insgesamt 4 Schaltmöglichkeiten (Gain, Kanal, Reverb und Lautstärke) und bietet außerdem die Option, ihn durch Verschrauben der hervorspringenden Bodenplatte in ein Pedalboard o.Ä. zu integrieren. Insgesamt präsentiert sich der FAT50 als solide konstruierter Amp in schlichtem Gewand, ohne jeglichen Zierrat. Nennen wir es „funktional“. Lediglich die silbernen Regler heben sich vom komplett schwarzen Äußeren ab.

Typ: RöhrencomboLeistungsverstärker: 50 W
Lautsprecher: 1 x 12″ Eminence Governor „Red Coat“
Kanäle: 2 Eingänge: 1 Effekt: Hall
FX loop regelbar
Abmessungen: 58 x 50 x 27 cm
Fußschalter: Palmer FAT 4 (4 Pedale)

Verkauf von privat. Kann keine Garantie oder Umtausch anbieten.

Anspielbereit in Berlin. Versand gegen Aufpreis (DHL, 17,50 €) möglich.

Should want to use this amp at home or any other volume-sensitive situation: have a look at the Palmer PDI-06.
A proper fix to any volume issue and it'll change this amp into an all-rounder.

Naturally, Palmer has thought of all the practical things like, fuses, different cab- and speaker loads and connections, a well placed handle for good portability and feet that keep this amp fixed to the stage. For all the technical specs and to see the head version of this amp as well as possible speaker cabs to use with it, please visit the Palmer website.
  • KEINEN Kontakt zur Übermittlung von Diensten oder Angeboten

Anz.-ID: 7003181498

Anz. geschaltet:

Best of [?]